King FoldaLift Trolley

​

The FoldaLift has been specially engineered to solve two specific problems.

• The first is to raise or lower  a product easily, so that it may be placed on to a bench, rack, shelf or vehicle, in order to prevent personal lifting related injuries.

• The second is to make it fold up, so that is takes up little room in a vehicle, should you wish to take a delivery / lifting trolley with you. FoldaLift achieves these ends.

​

Dimensions

​

• The trolley depth when folded is only 450mm.

• Height is 1405mm.

• Width is 620mm.

• Unit weight is 28 Kgs.

• The lift off (and separately stowable) deck weighs 5 Kgs.

• The rear wheels are 250mm diameter, with 50mm wide rubber treads, which roll easily over gravel or grating. Double ball bearings are fitted into each wheel for ease of rolling.

• The front castors have 80mm diameter grey rubber treads. Both have directional locks and brakes also, which are great for stabilizing the trolley, when transferring product to and from the deck.

 

Lifting mechanism

​

The wire rope hand ‘brake’ winch allows the deck to remain stationary with a load, at any height. To lower, simply rotate the winch handle anti-clockwise. The wire rope passes around a sheave on the carriage, which changes the lift weight ratio to a 2:1 ratio lift, which in effect means that the effort to lift the load is half that of a direct lift winch. We did this, because direct lift is fine for light loads but brute force is needed for heavier loads, and some people are just not built for it.

The hand winch is also silent, so for use in an office or quiet room, there is nothing better. The winch is also specially treated to be rust and scratch resistant, then it is powder coated for maximum protection.

FoldaLift saves backs. It rotates on its own axis. Has castors with brakes. It allows horizontal transport. It lifts and lowers. What more can you ask of a trolley?